Local Honda dealer wanted $622 parts and labor for this job. I used OEM parts and the cost was about $260 from. The pieces with the lugs attached to the rubber are supposed to be vertical and obviously should not be torn away from the surrounding rubber.
See the attached pictures for the old mounts. I did not have a torque wrench so I just did all the bolts snug tight. Re-install new mount with arrow in the same direction. Note that there is a direction arrow on the mount flange that points towards the front of the car. Remove the two remaining bolts that attach mount to body. Remove 17mm horizontal bolt first and then two bolts for the engine bracket. Slide power steering reservoir out of the way. Place your floor jack with 2×4 under the oil pan and raise with slight contact to pan. Be sure not to forget to reattach the vacuum line to the bottom of the mount. Raise engine with jack enough to allow mount to be removed and replaced. Having the extension at a slight angle makes this much easier. This is where you will need the universal extension in order to remove the left rear bolt. Remove the four mounting bolts that are attached to the sub-frame.
Remove the two bolts on the bumper bracket that goes over the mount. Raise enough to make contact at this point in time. Place floor jack with 2×4 between jack cup and transaxle. While you are under the car remove the vacuum line on the bottom of the mount.Īlso need to remove upper radiator hose and burp cooling system after you are finished with reassembly.
INSTALLING HONDA NAVIGATION UPDATE FOR 2013 ACCORD V6 DRIVER
side fan in order to remove the driver side. Noticed that some people remove the pass. Remove plastic shroud on bottom of car and remove driver side cooling fan, battery and tray. Universal extension (wobble type) and some misc. There several DIY with pics on either or if needed.ġ0mm, 12mm, 14mm, and 17 mm sockets (mount bolts and nuts are 14mm and 17mm) Sorry no pictures other than the old mounts. Just wanted to share some information about this job and perhaps it will help someone else. Triton Bonnet protector Decal sticker premium Vinyl Mitsubishi 4 Accord UPC: Does Size: 22mm apply Apply Condition: Used not 2012 Update DVD Item 1952 Honda 22mm Not 2011 Manufacturer Belzer Wrench Crosstour 13 Part 2010 Navigation 2013 specifics Number: Does Brand: belzer 17 keys Solid Acacia Koa Mahogany oval shape Kalimba MBIRA Thu items. I finished earlier today replacing the front and passenger side engine mounts on my 2005 Accord V6.
0 kommentar(er)
